Schneider Electric 140CPS11100 – Modicon Quantum power supply 115/230 V AC, 3 A
Schneider Electric 140CPS11100 – Power supply module from the Modicon Quantum range. Status: discontinued by the manufacturer, no longer available new. Van Haelen supplies it refurbished, with a 24-month warranty.
The Schneider Electric 140CPS11100 is the power supply for Modicon Quantum with input 115/230 V AC and 3 A. The module is plugged into the Quantum rack and supplies the modules in that rack. Modicon Quantum is the Schneider Electric PLC platform for large installations and process control; an identical module replaces a defective one without changes to the project. EAN 3595861135208. According to the product data the type is no longer available (obsolete); no successor is specified. When replacing, switch off the mains, plug the power supply into the same slot of the rack, carry over the mains connection and after switching on check the operation of the rack.
Available as
Product data
| Manufacturer | Schneider Electric |
|---|
| Part number | 140CPS11100 |
|---|
| Type designation | Power supply module |
|---|
| Series | Modicon Quantum |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new |
|---|
| ETIM | EC002540 |
|---|
| HS code | 85389091 |
|---|
| Country of origin | FR |
|---|
| Weight | 0,65 kg |
|---|
| Dimensions | 16,50 x 31,00 x 4,50 cm |
|---|
Documentation from the manufacturer
All products of the Modicon Quantum series
All Power supplies
Faults and fixes 140CPS11100
Problems with 140CPS11100: no 24 V, LED off or flashing
LED off: check the mains voltage and the input fuse. LED flashing or the output coming back briefly again and again: the supply is in overload protection (hiccup), usually because of a short circuit or too heavy a load on the 24 V side. Disconnect the load: if the 24 V returns, the fault is in the installation, not in the supply.
140CPS11100: output voltage sags or ripple increases
A supply that sags under load after years or shows more ripple usually has aged electrolytic capacitors. This shows as sporadic CPU resets, modules reporting SF or panels restarting. Replacement is then the reliable remedy; a refurbishment replaces these capacitors and tests the supply under load.
Fault not fixed: replace, exchange or repair the 140CPS11100?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 140CPS11100 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 140CPS11100 still available?
Not new from the manufacturer any more: the 140CPS11100 was discontinued. Van Haelen supplies it refurbished and tested.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What do I check when replacing a 140CPS11100?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.