Allen-Bradley 20BC037A0AYNANC0
Allen-Bradley 20BC037A0AYNANC0 – Frequentieregelaars from the 700 range. Status: discontinued by the manufacturer, no longer available new. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
The Allen-Bradley 20BC037A0AYNANC0 is a Allen-Bradley drive from the Powerflex (700) range. Status: discontinued by the manufacturer, no longer available new. Key data: weight 7.9 kg, dimensions 135,50 x 26,50 x 16,50 cm, HS code 85044095. When replacing, keep the parameter set of the old unit; it makes setting up the replacement quick. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Allen-Bradley |
|---|
| Part number | 20BC037A0AYNANC0 |
|---|
| Series | 700 |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new |
|---|
| ETIM | EC001857 |
|---|
| HS code | 85044095 |
|---|
| Weight | 7,9 kg |
|---|
| Dimensions | 135,50 x 26,50 x 16,50 cm |
|---|
Documentation from the manufacturer
All products of the 700 series
Faults and fixes 20BC037A0AYNANC0
Problems with 20BC037A0AYNANC0: F4, F5, F12, F13 or F64
On Allen-Bradley PowerFlex F4 is undervoltage (mains gone or sagging), F5 DC-bus overvoltage (decelerating too fast without a dynamic brake), F7 motor overload, F8 heat sink overtemperature, F12 hardware overcurrent (short circuit or earth fault in motor or cable), F13 ground fault and F64 drive overload. F2 is the auxiliary input (an external interlock, not a defect). If F12 returns with no motor, the power section is defective.
What do I check when replacing a 20BC037A0AYNANC0?
Read out the parameters with DriveExplorer, DriveTools or the HIM, or use the HIM copy function. Mind the full catalogue number: rating, voltage, frame and whether the drive has a built-in communication card (DeviceNet, EtherNet/IP). After replacement compare the firmware revision with the Add-On Profile in the Logix project.
Fault not fixed: replace, exchange or repair the 20BC037A0AYNANC0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 20BC037A0AYNANC0 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 20BC037A0AYNANC0 still available?
Not new from the manufacturer any more: the 20BC037A0AYNANC0 was discontinued. Van Haelen supplies it refurbished and tested.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 20BC037A0AYNANC0?
Keep the parameter set of the old unit; it makes setting up the replacement quick. Also check power rating, supply voltage and any option boards.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.