Siemens 6AG1307-1EA80-2AA0 – SIPLUS PS S7-300 PS307 5A
Siemens 6AG1307-1EA80-2AA0 – SIPLUS PS S7-300 PS307 5A from the SIMATIC S7 range. Status: discontinued by the manufacturer, no longer available new since December 2016; successor 6AG1307-1EA01-7AA0. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: 6AG1 307-1EA80-2AA0, 6AG13071EA802AA0
The Siemens 6AG1307-1EA80-2AA0 is a S7-300 control component from the SIMATIC S7 range. Manufacturer type designation: SIPLUS PS S7-300 PS307 5A. Status: discontinued by the manufacturer, no longer available new since December 2016; successor according to the manufacturer: 6AG1307-1EA01-7AA0. Key data: weight 0.67 kg, HS code 85044090. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6AG1307-1EA80-2AA0 |
|---|
| Type designation | SIPLUS PS S7-300 PS307 5A |
|---|
| Series | SIMATIC S7 |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since December 2016 |
|---|
| Successor | 6AG1307-1EA01-7AA0 |
|---|
| ETIM | EC002540 |
|---|
| HS code | 85044090 |
|---|
| Country of origin | DE |
|---|
| Weight | 0,67 kg |
|---|
Documentation from the manufacturer
All products of the SIMATIC S7 series
Faults and fixes 6AG1307-1EA80-2AA0
Problems with 6AG1307-1EA80-2AA0: no 24 V, LED off or flashing
LED off: check the mains voltage and the input fuse. LED flashing or the output coming back briefly again and again: the supply is in overload protection (hiccup), usually because of a short circuit or too heavy a load on the 24 V side. Disconnect the load: if the 24 V returns, the fault is in the installation, not in the supply.
6AG1307-1EA80-2AA0: output voltage sags or ripple increases
A supply that sags under load after years or shows more ripple usually has aged electrolytic capacitors. This shows as sporadic CPU resets, modules reporting SF or panels restarting. Replacement is then the reliable remedy; a refurbishment replaces these capacitors and tests the supply under load.
Fault not fixed: replace, exchange or repair the 6AG1307-1EA80-2AA0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6AG1307-1EA80-2AA0 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6AG1307-1EA80-2AA0 still available?
Not new from the manufacturer any more: the 6AG1307-1EA80-2AA0 was discontinued since December 2016. Van Haelen supplies it refurbished and tested.
What is the successor of the 6AG1307-1EA80-2AA0?
According to the manufacturer it is the 6AG1307-1EA01-7AA0. A successor does not always fit an existing installation without changes; replacing like for like is often the fastest route. If in doubt, ask us.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6AG1307-1EA80-2AA0?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.