Siemens 6AG4104-1DP24-1BC0 – SIMATIC IPC547C
Siemens 6AG4104-1DP24-1BC0 – SIMATIC IPC547C from the SIMATIC Rack PC range. Status: discontinued by the manufacturer, no longer available new since February 2017. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: 6AG4 104-1DP24-1BC0, 6AG41041DP241BC0
The Siemens 6AG4104-1DP24-1BC0 is a operator panel or industrial PC from the Simatic Rack PC range. Manufacturer type designation: SIMATIC IPC547C. Status: discontinued by the manufacturer, no longer available new since February 2017. Key data: weight 17.625 kg, HS code 84715000. Back up the project before replacing the panel and check that the software version matches. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6AG4104-1DP24-1BC0 |
|---|
| Type designation | SIMATIC IPC547C |
|---|
| Series | SIMATIC Rack PC |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since February 2017 |
|---|
| ETIM | EC001413 |
|---|
| HS code | 84715000 |
|---|
| Weight | 17,625 kg |
|---|
Documentation from the manufacturer
All products of the SIMATIC Rack PC series
Faults and fixes 6AG4104-1DP24-1BC0
Problems with 6AG4104-1DP24-1BC0: does not boot, BIOS settings or date lost
An industrial PC that starts with a wrong date after a power loss or hangs in the BIOS has a flat CMOS battery (coin cell). Replace it and restore the BIOS settings (boot order, SATA mode). If it still does not boot, the storage (HDD, SSD, CompactFlash) and the power supply are the next suspects.
6AG4104-1DP24-1BC0: drops out when warm or restarts by itself
Spontaneous restarts and drop-outs after running for a while are mostly thermal: a clogged dust filter, a fan that no longer turns or dried-out thermal paste. Clean filters and fans and check the cabinet temperature. Aged capacitors in the power supply give the same picture; a refurbishment addresses both.
What do I check when replacing a 6AG4104-1DP24-1BC0?
First make an image of the old device's storage; the software and licences are on it. Choose the same product version so chipset and drivers match the image, and carry over the CompactFlash or SSD with the image where possible. Then check the licences of WinCC, PCS 7 or the machine software, as they are sometimes tied to the hardware.
Fault not fixed: replace, exchange or repair the 6AG4104-1DP24-1BC0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6AG4104-1DP24-1BC0 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6AG4104-1DP24-1BC0 still available?
Not new from the manufacturer any more: the 6AG4104-1DP24-1BC0 was discontinued since February 2017. Van Haelen supplies it refurbished and tested.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6AG4104-1DP24-1BC0?
Back up the project before replacing the panel and check that the project's software version matches the panel.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.