Siemens 6AV2145-6KM00-0AA0 – IWP10F Mobile WebClient
Siemens 6AV2145-6KM00-0AA0 – IWP10F Mobile WebClient from the SIMATIC HMI IWP10F Mobile WebClient range. Status: active in the manufacturer's range. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
Also written as: 6AV2 145-6KM00-0AA0, 6AV21456KM000AA0
The Siemens 6AV2145-6KM00-0AA0 is a operator panel or industrial PC from the SIMATIC HMI IWP10F Mobile WebClient range. Manufacturer type designation: IWP10F Mobile WebClient. Status: active in the manufacturer's product range. Key data: weight 1.5 kg, HS code 85371098. Back up the project before replacing the panel and check that the software version matches. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6AV2145-6KM00-0AA0 |
|---|
| Type designation | IWP10F Mobile WebClient |
|---|
| Series | SIMATIC HMI IWP10F Mobile WebClient |
|---|
| Manufacturer status | active in the manufacturer's range |
|---|
| ETIM | EC001427 |
|---|
| HS code | 85371098 |
|---|
| Weight | 1,5 kg |
|---|
Documentation from the manufacturer
All products of the SIMATIC HMI IWP10F Mobile WebClient series
Faults and fixes 6AV2145-6KM00-0AA0
Problems with 6AV2145-6KM00-0AA0: screen dark or backlight weak
A screen that keeps getting darker or is only readable with a torch has a worn backlight; on older panels (OP, TP, MP) that is a CCFL tube, on newer ones LEDs. A screen that stays off while the panel still communicates points to the backlight supply or inverter. Both are replaced in a refurbishment; a refurbished panel usually costs less than a single repair plus the downtime.
6AV2145-6KM00-0AA0: touch does not respond or responds in the wrong spot
If the touch screen responds offset, recalibrate it first (Control Panel or Loader, touch calibration). Dead zones, ghost touches or a corner that no longer responds are a worn touch foil; that is replaced in a refurbishment. On key panels (OP, keypad) worn membrane keys are the equivalent.
6AV2145-6KM00-0AA0 starts in the Loader or shows no project
If the panel starts in the Loader (Transfer, Start, Control Panel) without opening the project, the project is no longer present or is corrupted. Download it again from WinCC flexible, WinCC or TIA Portal, or restore a backup with ProSave. Without the project file this cannot be recovered: always keep a backup of every panel in the installation.
6AV2145-6KM00-0AA0: #### in the fields or connection to the PLC lost
Hashes in the fields mean the panel does not get its tags from the PLC. Check the connection settings (PROFIBUS address and baud rate, or IP address and rack/slot), the cable and whether the PLC is in RUN. After replacing the panel the same connection settings must be in the project and the project's runtime version must match the panel type.
Fault not fixed: replace, exchange or repair the 6AV2145-6KM00-0AA0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6AV2145-6KM00-0AA0 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6AV2145-6KM00-0AA0 still available?
Yes. The 6AV2145-6KM00-0AA0 is still in the manufacturer's range.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6AV2145-6KM00-0AA0?
Back up the project before replacing the panel and check that the project's software version matches the panel.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.