Siemens 6AV6613-1GA51-3CA0 – WinCC flexible 2008 Runtime 4096
Siemens 6AV6613-1GA51-3CA0 – WinCC flexible 2008 Runtime 4096 from the Siemens HMI range. Status: in phase-out at the manufacturer since October 2022. Van Haelen supplies it new in sealed factory packaging, with a 24-month warranty.
Also written as: 6AV6 613-1GA51-3CA0, 6AV66131GA513CA0
The Siemens 6AV6613-1GA51-3CA0 is a operator panel or industrial PC from the SIMATIC HMI range. Manufacturer type designation: WinCC flexible 2008 Runtime 4096. Status: in phase-out at the manufacturer since October 2022. Key data: weight 0.211 kg, dimensions 26,8 x 18,4 x 3,2 cm, HS code 85234910. Back up the project before replacing the panel and check that the software version matches. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6AV6613-1GA51-3CA0 |
|---|
| Type designation | WinCC flexible 2008 Runtime 4096 |
|---|
| Series | Siemens HMI |
|---|
| Manufacturer status | in phase-out at the manufacturer since October 2022 |
|---|
| ETIM | EC001412 |
|---|
| HS code | 85234910 |
|---|
| Weight | 0,211 kg |
|---|
| Dimensions | 26,8 x 18,4 x 3,2 cm |
|---|
Documentation from the manufacturer
All products of the Siemens HMI series
Faults and fixes 6AV6613-1GA51-3CA0
Problems with 6AV6613-1GA51-3CA0: screen dark or backlight weak
A screen that keeps getting darker or is only readable with a torch has a worn backlight; on older panels (OP, TP, MP) that is a CCFL tube, on newer ones LEDs. A screen that stays off while the panel still communicates points to the backlight supply or inverter. Both are replaced in a refurbishment; a refurbished panel usually costs less than a single repair plus the downtime.
6AV6613-1GA51-3CA0: touch does not respond or responds in the wrong spot
If the touch screen responds offset, recalibrate it first (Control Panel or Loader, touch calibration). Dead zones, ghost touches or a corner that no longer responds are a worn touch foil; that is replaced in a refurbishment. On key panels (OP, keypad) worn membrane keys are the equivalent.
6AV6613-1GA51-3CA0 starts in the Loader or shows no project
If the panel starts in the Loader (Transfer, Start, Control Panel) without opening the project, the project is no longer present or is corrupted. Download it again from WinCC flexible, WinCC or TIA Portal, or restore a backup with ProSave. Without the project file this cannot be recovered: always keep a backup of every panel in the installation.
6AV6613-1GA51-3CA0: #### in the fields or connection to the PLC lost
Hashes in the fields mean the panel does not get its tags from the PLC. Check the connection settings (PROFIBUS address and baud rate, or IP address and rack/slot), the cable and whether the PLC is in RUN. After replacing the panel the same connection settings must be in the project and the project's runtime version must match the panel type.
Fault not fixed: replace, exchange or repair the 6AV6613-1GA51-3CA0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6AV6613-1GA51-3CA0 new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6AV6613-1GA51-3CA0 still available?
The manufacturer has put the 6AV6613-1GA51-3CA0 in phase-out since October 2022; new units are getting scarce. Van Haelen supplies it from stock.
What should I check when replacing a 6AV6613-1GA51-3CA0?
Back up the project before replacing the panel and check that the project's software version matches the panel.