Siemens 6AV7241-1WA07-0FA0 – SIMATIC IPC 477E 15" Multitouch neutral
Siemens 6AV7241-1WA07-0FA0 – SIMATIC IPC 477E 15" Multitouch neutral from the IPC range. Status: in phase-out at the manufacturer since January 2026. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
Also written as: 6AV7 241-1WA07-0FA0, 6AV72411WA070FA0
The Siemens 6AV7241-1WA07-0FA0 is a operator panel or industrial PC from the Simatic Panel PC (IPC) range. Manufacturer type designation: SIMATIC IPC 477E 15" Multitouch neutral. Status: in phase-out at the manufacturer since January 2026. Key data: weight 8.96 kg, dimensions 60,5 x 58,5 x 35,5 cm, HS code 84714100. Back up the project before replacing the panel and check that the software version matches. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6AV7241-1WA07-0FA0 |
|---|
| Type designation | SIMATIC IPC 477E 15" Multitouch neutral |
|---|
| Series | IPC |
|---|
| Manufacturer status | in phase-out at the manufacturer since January 2026 |
|---|
| ETIM | EC001412 |
|---|
| HS code | 84714100 |
|---|
| Weight | 8,96 kg |
|---|
| Dimensions | 60,5 x 58,5 x 35,5 cm |
|---|
Documentation from the manufacturer
All products of the IPC series
Faults and fixes 6AV7241-1WA07-0FA0
Is the 6AV7241-1WA07-0FA0 discontinued or in phase-out?
Siemens has published a product note on this (01-07-2026): "Overview of the status change for SIMATIC IPC products: product phase-outs". Phase-out or discontinued means new units get scarce or stop; we supply the 6AV7241-1WA07-0FA0 refurbished and tested from stock, with a 24-month warranty.
Source: Siemens Industry Online Support, 01-07-2026
Siemens FAQ: What dangerous goods and battery information is available for SIMATIC IPCs and the batteries used in them?
Siemens answers this question in an FAQ for the 6AV7241-1WA07-0FA0 (02-09-2026); the link is below. If that does not solve it, or the unit is defective: we supply the 6AV7241-1WA07-0FA0 refurbished from stock, with a test report and a 24-month warranty.
Source: Siemens Industry Online Support, 02-09-2026
Siemens FAQ: How do you obtain a replacement for your SIMATIC IPC Restore medium?
Siemens answers this question in an FAQ for the 6AV7241-1WA07-0FA0 (14-12-2021); the link is below. If that does not solve it, or the unit is defective: we supply the 6AV7241-1WA07-0FA0 refurbished from stock, with a test report and a 24-month warranty.
Source: Siemens Industry Online Support, 14-12-2021
Siemens FAQ: What options exist for ordering missing plug-in terminal strips for the power supply of Panels, Panel PCs and Box PCs?
Siemens answers this question in an FAQ for the 6AV7241-1WA07-0FA0 (24-11-2021); the link is below. If that does not solve it, or the unit is defective: we supply the 6AV7241-1WA07-0FA0 refurbished from stock, with a test report and a 24-month warranty.
Source: Siemens Industry Online Support, 24-11-2021
Siemens FAQ: Why are licenses of WinCC Runtime Advanced damaged on IPCs?
Siemens answers this question in an FAQ for the 6AV7241-1WA07-0FA0 (17-05-2021); the link is below. If that does not solve it, or the unit is defective: we supply the 6AV7241-1WA07-0FA0 refurbished from stock, with a test report and a 24-month warranty.
Source: Siemens Industry Online Support, 17-05-2021
Where do I find the manual of the 6AV7241-1WA07-0FA0?
From the manufacturer, free of charge: SIMATIC Industrial PC Panel Drivers and Tools PDT V1.7.3 for IPC/IFP with single-touch and multi-touch screen; SIMATIC IPC ORCLA V1.2 (link below). They contain the wiring diagram, LED meanings and the technical data. With every refurbished unit we supply the test report per serial number.
Source: Siemens Industry Online Support, 30-09-2026
Problems with 6AV7241-1WA07-0FA0: does not boot, BIOS settings or date lost
An industrial PC that starts with a wrong date after a power loss or hangs in the BIOS has a flat CMOS battery (coin cell). Replace it and restore the BIOS settings (boot order, SATA mode). If it still does not boot, the storage (HDD, SSD, CompactFlash) and the power supply are the next suspects.
6AV7241-1WA07-0FA0: drops out when warm or restarts by itself
Spontaneous restarts and drop-outs after running for a while are mostly thermal: a clogged dust filter, a fan that no longer turns or dried-out thermal paste. Clean filters and fans and check the cabinet temperature. Aged capacitors in the power supply give the same picture; a refurbishment addresses both.
What do I check when replacing a 6AV7241-1WA07-0FA0?
First make an image of the old device's storage; the software and licences are on it. Choose the same product version so chipset and drivers match the image, and carry over the CompactFlash or SSD with the image where possible. Then check the licences of WinCC, PCS 7 or the machine software, as they are sometimes tied to the hardware.
Fault not fixed: replace, exchange or repair the 6AV7241-1WA07-0FA0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6AV7241-1WA07-0FA0 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6AV7241-1WA07-0FA0 still available?
The manufacturer has put the 6AV7241-1WA07-0FA0 in phase-out since January 2026; new units are getting scarce. Van Haelen supplies it from stock.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6AV7241-1WA07-0FA0?
Back up the project before replacing the panel and check that the project's software version matches the panel.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.