Siemens 6AV7802-1AA10-2AB0 – SIMATIC Panel PC 677 15" Touch
Siemens 6AV7802-1AA10-2AB0 – SIMATIC Panel PC 677 15" Touch from the PC677 range. Status: discontinued by the manufacturer, no longer available new since October 2015. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
Also written as: 6AV7 802-1AA10-2AB0, 6AV78021AA102AB0
The Siemens 6AV7802-1AA10-2AB0 is a operator panel or industrial PC from the Simatic Panel PC (PC677) range. Manufacturer type designation: SIMATIC Panel PC 677 15" Touch. Status: discontinued by the manufacturer, no longer available new since October 2015. Key data: weight 17 kg, dimensions 67,00 x 83,00 x 11,50 cm, HS code 84714100. Back up the project before replacing the panel and check that the software version matches. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6AV7802-1AA10-2AB0 |
|---|
| Type designation | SIMATIC Panel PC 677 15" Touch |
|---|
| Series | PC677 |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since October 2015 |
|---|
| ETIM | EC001414 |
|---|
| HS code | 84714100 |
|---|
| Weight | 17 kg |
|---|
| Dimensions | 67,00 x 83,00 x 11,50 cm |
|---|
Documentation from the manufacturer
All products of the PC677 series
Faults and fixes 6AV7802-1AA10-2AB0
Siemens FAQ: What measures do you have to take into account when constructing an IP 20 enclosure for a Panel PC 677 / 677B?
Siemens answers this question in an FAQ for the 6AV7802-1AA10-2AB0 (18-10-2007); the link is below. If that does not solve it, or the unit is defective: we supply the 6AV7802-1AA10-2AB0 refurbished from stock, with a test report and a 24-month warranty.
Source: Siemens Industry Online Support, 18-10-2007
Siemens FAQ: How can you improve booting performance in a Panel PC 677 or in a Box PC?
Siemens answers this question in an FAQ for the 6AV7802-1AA10-2AB0 (13-09-2007); the link is below. If that does not solve it, or the unit is defective: we supply the 6AV7802-1AA10-2AB0 refurbished from stock, with a test report and a 24-month warranty.
Source: Siemens Industry Online Support, 13-09-2007
Where do I find the manual of the 6AV7802-1AA10-2AB0?
From the manufacturer, free of charge: Panel PC & Flat Panel Important Operating Instructions (link below). They contain the wiring diagram, LED meanings and the technical data. With every refurbished unit we supply the test report per serial number.
Source: Siemens Industry Online Support, 15-02-2006
Problems with 6AV7802-1AA10-2AB0: does not boot, BIOS settings or date lost
An industrial PC that starts with a wrong date after a power loss or hangs in the BIOS has a flat CMOS battery (coin cell). Replace it and restore the BIOS settings (boot order, SATA mode). If it still does not boot, the storage (HDD, SSD, CompactFlash) and the power supply are the next suspects.
6AV7802-1AA10-2AB0: drops out when warm or restarts by itself
Spontaneous restarts and drop-outs after running for a while are mostly thermal: a clogged dust filter, a fan that no longer turns or dried-out thermal paste. Clean filters and fans and check the cabinet temperature. Aged capacitors in the power supply give the same picture; a refurbishment addresses both.
What do I check when replacing a 6AV7802-1AA10-2AB0?
First make an image of the old device's storage; the software and licences are on it. Choose the same product version so chipset and drivers match the image, and carry over the CompactFlash or SSD with the image where possible. Then check the licences of WinCC, PCS 7 or the machine software, as they are sometimes tied to the hardware.
Fault not fixed: replace, exchange or repair the 6AV7802-1AA10-2AB0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6AV7802-1AA10-2AB0 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6AV7802-1AA10-2AB0 still available?
Not new from the manufacturer any more: the 6AV7802-1AA10-2AB0 was discontinued since October 2015. Van Haelen supplies it refurbished and tested.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6AV7802-1AA10-2AB0?
Back up the project before replacing the panel and check that the project's software version matches the panel.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.