Siemens 6ES7132-0HF00-0XB0 – ET200B EL-BLOCK 16DO AC 230V 0.5A
Siemens 6ES7132-0HF00-0XB0 – ET200B EL-BLOCK 16DO AC 230V 0.5A from the SIMATIC S7 range. Status: discontinued by the manufacturer, no longer available new since October 2017. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: 6ES7 132-0HF00-0XB0, 6ES71320HF000XB0
The Siemens 6ES7132-0HF00-0XB0 is a S7-300 control component from the SIMATIC S7 range. Manufacturer type designation: ET200B EL-BLOCK 16DO AC 230V 0.5A. Status: discontinued by the manufacturer, no longer available new since October 2017. Key data: weight 0.425 kg, HS code 85389091. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6ES7132-0HF00-0XB0 |
|---|
| Type designation | ET200B EL-BLOCK 16DO AC 230V 0.5A |
|---|
| Series | SIMATIC S7 |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since October 2017 |
|---|
| ETIM | EC001599 |
|---|
| HS code | 85389091 |
|---|
| Country of origin | DE |
|---|
| Weight | 0,425 kg |
|---|
Documentation from the manufacturer
All products of the SIMATIC S7 series
Faults and fixes 6ES7132-0HF00-0XB0
Problems with 6ES7132-0HF00-0XB0: BF LED, station unreachable
On an ET 200 interface module BF indicates a bus fault: on PROFINET a missing or wrong device name and IP setting, on PROFIBUS a wrong address or a cable without termination. After replacement the device name must be assigned again (TIA: Online, assign device name) or the PROFIBUS address switch set to the same position. SF with BF off points to a module in the station: wrong module, missing module or a channel diagnostic.
6ES7132-0HF00-0XB0: module drops out under vibration or heat
In distributed stations contact problems on the terminal or base module and overheating in the cabinet are the most common causes of sporadic drop-outs. Check the module's latch on the base module, the earth rail and the cabinet temperature. If the station keeps dropping out at the same module, replace that module.
Fault not fixed: replace, exchange or repair the 6ES7132-0HF00-0XB0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6ES7132-0HF00-0XB0 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6ES7132-0HF00-0XB0 still available?
Not new from the manufacturer any more: the 6ES7132-0HF00-0XB0 was discontinued since October 2017. Van Haelen supplies it refurbished and tested.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6ES7132-0HF00-0XB0?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.