Siemens 6ES7132-4BB00-0AA0 – ET 200S electronic module 2 DO standard 24 V DC/0.5 A, 15 mm, pack of 5
Siemens 6ES7 132-4BB00-0AA0 – ET200S EL-MOD 2DO ST DC24V 0.5A 5PC from the SIMATIC DP range. Status: discontinued by the manufacturer, no longer available new since October 2012; successor 6ES7132-4BB01-0AA0. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
Also written as: 6ES7132-4BB00-0AA0, 6ES71324BB000AA0
The Siemens 6ES7132-4BB00-0AA0 is the electronic module for ET 200S with 2 digital outputs standard 24 V DC/0.5 A, width 15 mm, supplied in packing units of 5 modules. The module is snapped onto a terminal module of the ET 200S station and switches two 24 V loads such as relays, valves or signal lamps up to 0.5 A per output; the station couples to the controller via PROFIBUS DP or PROFINET. EAN 4025515058212. Siemens reports this type as no longer available and discontinued it on 1 October 2012; the successor is the 6ES7132-4BB01-0AA0. When replacing, remove the module from the terminal module without disconnecting the wiring, snap the new one into the same position and after switching on check the outputs in the diagnostics; note that the pack contains 5 modules.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6ES7 132-4BB00-0AA0 |
|---|
| Type designation | ET200S EL-MOD 2DO ST DC24V 0.5A 5PC |
|---|
| Series | SIMATIC DP |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since October 2012 |
|---|
| Successor | 6ES7132-4BB01-0AA0 |
|---|
| ETIM | EC001599 |
|---|
| HS code | 85389091 |
|---|
| Country of origin | DE |
|---|
| Weight | 0,183 kg |
|---|
Documentation from the manufacturer
All products of the SIMATIC DP series
All PLC I/O modules
Faults and fixes 6ES7 132-4BB00-0AA0
Problems with 6ES7 132-4BB00-0AA0: BF LED, station unreachable
On an ET 200 interface module BF indicates a bus fault: on PROFINET a missing or wrong device name and IP setting, on PROFIBUS a wrong address or a cable without termination. After replacement the device name must be assigned again (TIA: Online, assign device name) or the PROFIBUS address switch set to the same position. SF with BF off points to a module in the station: wrong module, missing module or a channel diagnostic.
6ES7 132-4BB00-0AA0: module drops out under vibration or heat
In distributed stations contact problems on the terminal or base module and overheating in the cabinet are the most common causes of sporadic drop-outs. Check the module's latch on the base module, the earth rail and the cabinet temperature. If the station keeps dropping out at the same module, replace that module.
Fault not fixed: replace, exchange or repair the 6ES7 132-4BB00-0AA0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6ES7 132-4BB00-0AA0 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6ES7 132-4BB00-0AA0 still available?
Not new from the manufacturer any more: the 6ES7 132-4BB00-0AA0 was discontinued since October 2012. Van Haelen supplies it refurbished and tested.
What is the successor of the 6ES7 132-4BB00-0AA0?
According to the manufacturer it is the 6ES7132-4BB01-0AA0. A successor does not always fit an existing installation without changes; replacing like for like is often the fastest route. If in doubt, ask us.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What do I check when replacing a 6ES7 132-4BB00-0AA0?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.