Siemens 6ES7 134-4JB50-0AB0 – ET200S El-Mod 2AI RTD PT100 NI100
Siemens 6ES7 134-4JB50-0AB0 – ET200S El-Mod 2AI RTD PT100 NI100 from the ET 200S range. Status: discontinued by the manufacturer, no longer available new since September 2020; successor 6ES7134-4JB51-0AB0. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
Also written as: 6ES7134-4JB50-0AB0, 6ES71344JB500AB0
The Siemens 6ES7 134-4JB50-0AB0 is a S7-300 control component from the SIMATIC ET200 range. Manufacturer type designation: ET200S El-Mod 2AI RTD PT100 NI100. Status: discontinued by the manufacturer, no longer available new since September 2020; successor according to the manufacturer: 6ES7134-4JB51-0AB0. Key data: weight 0.047 kg, HS code 85389091. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6ES7 134-4JB50-0AB0 |
|---|
| Type designation | ET200S El-Mod 2AI RTD PT100 NI100 |
|---|
| Series | ET 200S |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since September 2020 |
|---|
| Successor | 6ES7134-4JB51-0AB0 |
|---|
| ETIM | EC001599 |
|---|
| HS code | 85389091 |
|---|
| Country of origin | DE |
|---|
| Weight | 0,047 kg |
|---|
| Dimensions | 9,00 x 6,4 x 2,3 cm |
|---|
Documentation from the manufacturer
All products of the ET 200S series
Faults and fixes 6ES7 134-4JB50-0AB0
Problems with 6ES7 134-4JB50-0AB0: BF LED, station unreachable
On an ET 200 interface module BF indicates a bus fault: on PROFINET a missing or wrong device name and IP setting, on PROFIBUS a wrong address or a cable without termination. After replacement the device name must be assigned again (TIA: Online, assign device name) or the PROFIBUS address switch set to the same position. SF with BF off points to a module in the station: wrong module, missing module or a channel diagnostic.
6ES7 134-4JB50-0AB0: module drops out under vibration or heat
In distributed stations contact problems on the terminal or base module and overheating in the cabinet are the most common causes of sporadic drop-outs. Check the module's latch on the base module, the earth rail and the cabinet temperature. If the station keeps dropping out at the same module, replace that module.
Fault not fixed: replace, exchange or repair the 6ES7 134-4JB50-0AB0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6ES7 134-4JB50-0AB0 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6ES7 134-4JB50-0AB0 still available?
Not new from the manufacturer any more: the 6ES7 134-4JB50-0AB0 was discontinued since September 2020. Van Haelen supplies it refurbished and tested.
What is the successor of the 6ES7 134-4JB50-0AB0?
According to the manufacturer it is the 6ES7134-4JB51-0AB0. A successor does not always fit an existing installation without changes; replacing like for like is often the fastest route. If in doubt, ask us.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6ES7 134-4JB50-0AB0?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.