Siemens 6ES7214-1BD21-0XB0 – CPU 224 AC PS 14DI DC/10DO RELAY
Siemens 6ES7214-1BD21-0XB0 – CPU 224 AC PS 14DI DC/10DO RELAY from the S7-200 range. Status: discontinued by the manufacturer, no longer available new since October 2014; successor 6ES7214-1BD23-0XB0. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
Also written as: 6ES7 214-1BD21-0XB0, 6ES72141BD210XB0
The Siemens 6ES7214-1BD21-0XB0 is a S7-1200/1500 control component from the Simatic S7-200 range. Manufacturer type designation: CPU 224 AC PS 14DI DC/10DO RELAY. Status: discontinued by the manufacturer, no longer available new since October 2014; successor according to the manufacturer: 6ES7214-1BD23-0XB0. Key data: weight 0.423 kg, HS code 85371091. When replacing, carry over the firmware version and memory card of the old unit and keep a backup of the program at hand. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6ES7214-1BD21-0XB0 |
|---|
| Type designation | CPU 224 AC PS 14DI DC/10DO RELAY |
|---|
| Series | S7-200 |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since October 2014 |
|---|
| Predecessor | 6ES7214-1BD20-0XB0 |
|---|
| Successor | 6ES7214-1BD23-0XB0 |
|---|
| ETIM | EC000236 |
|---|
| HS code | 85371091 |
|---|
| Country of origin | US |
|---|
| Weight | 0,423 kg |
|---|
| Dimensions | 16,4 x 10,1 x 7,3 cm |
|---|
Documentation from the manufacturer
All products of the S7-200 series
Faults and fixes 6ES7214-1BD21-0XB0
Problems with 6ES7214-1BD21-0XB0: ERROR LED red or flashing
A solid red ERROR LED indicates a fault that keeps the CPU in STOP (hardware, firmware or program); flashing red a fault the CPU reports while it keeps running. TIA Portal, Online & diagnostics, shows the diagnostic buffer with the cause. MAINT (yellow) is not a fault: maintenance requested, for instance a memory card running full.
6ES7214-1BD21-0XB0 does not start or the project will not load
On the S7-1200 the program is stored internally and optionally on a SIMATIC Memory Card; on the S7-1500 the card is mandatory. Check that the card is inserted and not formatted as the program card of another CPU. If the project will not load, the CPU firmware usually does not match the version the TIA project expects: check the version in the device configuration.
What do I check when replacing a 6ES7214-1BD21-0XB0?
Firmware version and issue must match the project; a higher firmware is usually fine after updating the version in TIA. Carry over the memory card or download again, and set the IP address and PROFINET device name again. Mind the protection level too: a CPU with access protection asks for the project password.
Fault not fixed: replace, exchange or repair the 6ES7214-1BD21-0XB0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6ES7214-1BD21-0XB0 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6ES7214-1BD21-0XB0 still available?
Not new from the manufacturer any more: the 6ES7214-1BD21-0XB0 was discontinued since October 2014. Van Haelen supplies it refurbished and tested.
What is the successor of the 6ES7214-1BD21-0XB0?
According to the manufacturer it is the 6ES7214-1BD23-0XB0. A successor does not always fit an existing installation without changes; replacing like for like is often the fastest route. If in doubt, ask us.
Does the 6ES7214-1BD21-0XB0 replace the 6ES7214-1BD20-0XB0?
Yes. According to the manufacturer the 6ES7214-1BD21-0XB0 is the successor of the 6ES7214-1BD20-0XB0. Before replacing, check that the project and the connections match the new version; if in doubt we also supply the 6ES7214-1BD20-0XB0 itself, refurbished or new, as long as it can be found.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6ES7214-1BD21-0XB0?
Carry over the firmware version and memory card of the old unit and keep a backup of the program at hand. Check the product version (issue) on the rating plate.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.