Siemens 6ES7 413-1XG01-0AB0 – SIMATIC S7-400 CPU 413-1
Siemens 6ES7 413-1XG01-0AB0 – SIMATIC S7-400 CPU 413-1 from the S7-400 range. Status: discontinued by the manufacturer, no longer available new since May 2010; successor 6ES7413-1XG02-0AB0. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
Also written as: 6ES7413-1XG01-0AB0, 6ES74131XG010AB0
The Siemens 6ES7 413-1XG01-0AB0 is a S7-400 control component from the Simatic S7 (S7-400) range. Manufacturer type designation: SIMATIC S7-400 CPU 413-1. Status: discontinued by the manufacturer, no longer available new since May 2010; successor according to the manufacturer: 6ES7413-1XG02-0AB0. Key data: weight 1.034 kg, dimensions 30,4 x 23,1 x 4,00 cm, HS code 85371091. When replacing, carry over the firmware version and memory card of the old unit and keep a backup of the program at hand. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6ES7 413-1XG01-0AB0 |
|---|
| Type designation | SIMATIC S7-400 CPU 413-1 |
|---|
| Series | S7-400 |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since May 2010 |
|---|
| Successor | 6ES7413-1XG02-0AB0 |
|---|
| ETIM | EC000236 |
|---|
| HS code | 85371091 |
|---|
| Country of origin | DE |
|---|
| Weight | 1,034 kg |
|---|
| Dimensions | 30,4 x 23,1 x 4,00 cm |
|---|
Documentation from the manufacturer
All products of the S7-400 series
Faults and fixes 6ES7 413-1XG01-0AB0
Problems with 6ES7 413-1XG01-0AB0: INTF or EXTF is on
INTF is an internal fault (CPU, firmware, program), EXTF an external one (a module, a station or the bus). The diagnostic buffer in STEP 7 names the cause and the module involved. BUS1F and BUS2F indicate a PROFIBUS or PROFINET fault on that interface.
6ES7 413-1XG01-0AB0: BATF LED, program lost after a power loss
The S7-400 keeps work memory and retentive data with a backup battery in the power supply module (PS405/PS407). BATF or a battery message means it is flat: replace the lithium battery while the supply is on, otherwise the program is gone after the next power loss. If the program is on a FLASH card, the CPU reloads it from there.
What do I check when replacing a 6ES7 413-1XG01-0AB0?
Check the firmware and product version on the rating plate against the project, carry over the memory card and download the program again. For CPUs in an H system (414H, 417H) make sure both CPUs run the same firmware and check the synchronisation modules.
Fault not fixed: replace, exchange or repair the 6ES7 413-1XG01-0AB0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6ES7 413-1XG01-0AB0 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6ES7 413-1XG01-0AB0 still available?
Not new from the manufacturer any more: the 6ES7 413-1XG01-0AB0 was discontinued since May 2010. Van Haelen supplies it refurbished and tested.
What is the successor of the 6ES7 413-1XG01-0AB0?
According to the manufacturer it is the 6ES7413-1XG02-0AB0. A successor does not always fit an existing installation without changes; replacing like for like is often the fastest route. If in doubt, ask us.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6ES7 413-1XG01-0AB0?
Carry over the firmware version and memory card of the old unit and keep a backup of the program at hand. Check the product version (issue) on the rating plate.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.