Siemens 6ES7591-1BA01-0AA0 – Display for CPU 1515/1516/1517/1518
Siemens 6ES7591-1BA01-0AA0 – Display for CPU 1515/1516/1517/1518. Status: discontinued by the manufacturer, no longer available new since February 2020; successor 6ES7591-1BA02-0AA0. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: 6ES7 591-1BA01-0AA0, 6ES75911BA010AA0
The Siemens 6ES7591-1BA01-0AA0 is a S7-1200/1500 control component. Manufacturer type designation: Display for CPU 1515/1516/1517/1518. Status: discontinued by the manufacturer, no longer available new since February 2020; successor according to the manufacturer: 6ES7591-1BA02-0AA0. Key data: weight 0.148 kg, HS code 85389091. When replacing, carry over the firmware version and memory card of the old unit and keep a backup of the program at hand. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6ES7591-1BA01-0AA0 |
|---|
| Type designation | Display for CPU 1515/1516/1517/1518 |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since February 2020 |
|---|
| Successor | 6ES7591-1BA02-0AA0 |
|---|
| ETIM | EC000236 |
|---|
| HS code | 85389091 |
|---|
| Weight | 0,148 kg |
|---|
Documentation from the manufacturer
Faults and fixes 6ES7591-1BA01-0AA0
Problems with 6ES7591-1BA01-0AA0: ERROR LED red or flashing
A solid red ERROR LED indicates a fault that keeps the CPU in STOP (hardware, firmware or program); flashing red a fault the CPU reports while it keeps running. TIA Portal, Online & diagnostics, shows the diagnostic buffer with the cause. MAINT (yellow) is not a fault: maintenance requested, for instance a memory card running full.
6ES7591-1BA01-0AA0 does not start or the project will not load
On the S7-1200 the program is stored internally and optionally on a SIMATIC Memory Card; on the S7-1500 the card is mandatory. Check that the card is inserted and not formatted as the program card of another CPU. If the project will not load, the CPU firmware usually does not match the version the TIA project expects: check the version in the device configuration.
What do I check when replacing a 6ES7591-1BA01-0AA0?
Firmware version and issue must match the project; a higher firmware is usually fine after updating the version in TIA. Carry over the memory card or download again, and set the IP address and PROFINET device name again. Mind the protection level too: a CPU with access protection asks for the project password.
Fault not fixed: replace, exchange or repair the 6ES7591-1BA01-0AA0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6ES7591-1BA01-0AA0 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6ES7591-1BA01-0AA0 still available?
Not new from the manufacturer any more: the 6ES7591-1BA01-0AA0 was discontinued since February 2020. Van Haelen supplies it refurbished and tested.
What is the successor of the 6ES7591-1BA01-0AA0?
According to the manufacturer it is the 6ES7591-1BA02-0AA0. A successor does not always fit an existing installation without changes; replacing like for like is often the fastest route. If in doubt, ask us.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6ES7591-1BA01-0AA0?
Carry over the firmware version and memory card of the old unit and keep a backup of the program at hand. Check the product version (issue) on the rating plate.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.