Siemens 6ES7591-1BA02-0AA0 – Display for CPU 1515/1516/1517/1518
Siemens 6ES7591-1BA02-0AA0 – Display for CPU 1515/1516/1517/1518 from the I/O Modules & Power supply range. Status: in phase-out at the manufacturer since October 2025. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: 6ES7 591-1BA02-0AA0, 6ES75911BA020AA0
The Siemens 6ES7591-1BA02-0AA0 is a S7-1200/1500 control component from the I/O Modules & Power supply range. Manufacturer type designation: Display for CPU 1515/1516/1517/1518. Status: in phase-out at the manufacturer since October 2025. Key data: weight 0.148 kg, HS code 85389091. When replacing, carry over the firmware version and memory card of the old unit and keep a backup of the program at hand. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6ES7591-1BA02-0AA0 |
|---|
| Type designation | Display for CPU 1515/1516/1517/1518 |
|---|
| Series | I/O Modules & Power supply |
|---|
| Manufacturer status | in phase-out at the manufacturer since October 2025 |
|---|
| ETIM | EC001419 |
|---|
| HS code | 85389091 |
|---|
| Weight | 0,148 kg |
|---|
Documentation from the manufacturer
All products of the I/O Modules & Power supply series
Faults and fixes 6ES7591-1BA02-0AA0
Problems with 6ES7591-1BA02-0AA0: no 24 V, LED off or flashing
LED off: check the mains voltage and the input fuse. LED flashing or the output coming back briefly again and again: the supply is in overload protection (hiccup), usually because of a short circuit or too heavy a load on the 24 V side. Disconnect the load: if the 24 V returns, the fault is in the installation, not in the supply.
6ES7591-1BA02-0AA0: output voltage sags or ripple increases
A supply that sags under load after years or shows more ripple usually has aged electrolytic capacitors. This shows as sporadic CPU resets, modules reporting SF or panels restarting. Replacement is then the reliable remedy; a refurbishment replaces these capacitors and tests the supply under load.
Fault not fixed: replace, exchange or repair the 6ES7591-1BA02-0AA0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6ES7591-1BA02-0AA0 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6ES7591-1BA02-0AA0 still available?
The manufacturer has put the 6ES7591-1BA02-0AA0 in phase-out since October 2025; new units are getting scarce. Van Haelen supplies it from stock.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6ES7591-1BA02-0AA0?
Carry over the firmware version and memory card of the old unit and keep a backup of the program at hand. Check the product version (issue) on the rating plate.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.