Siemens 6ES7715-1BB20-0BE1 – SIMATIC Field PG M3 Premium Full HD
Siemens 6ES7715-1BB20-0BE1 – SIMATIC Field PG M3 Premium Full HD from the Field PG M3 range. Status: discontinued by the manufacturer, no longer available new since April 2020. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: 6ES7 715-1BB20-0BE1, 6ES77151BB200BE1
The Siemens 6ES7715-1BB20-0BE1 is a Schneider/Modicon control component from the Simatic Field PG (Field PG M3) range. Manufacturer type designation: SIMATIC Field PG M3 Premium Full HD. Status: discontinued by the manufacturer, no longer available new since April 2020. Key data: weight 3.5 kg, dimensions 39,50 x 30,00 x 17,00 cm, HS code 84713000. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6ES7715-1BB20-0BE1 |
|---|
| Type designation | SIMATIC Field PG M3 Premium Full HD |
|---|
| Series | Field PG M3 |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since April 2020 |
|---|
| ETIM | EC001413 |
|---|
| HS code | 84713000 |
|---|
| Weight | 3,5 kg |
|---|
| Dimensions | 39,50 x 30,00 x 17,00 cm |
|---|
Documentation from the manufacturer
All products of the Field PG M3 series
Faults and fixes 6ES7715-1BB20-0BE1
Problems with 6ES7715-1BB20-0BE1: does not boot, BIOS settings or date lost
An industrial PC that starts with a wrong date after a power loss or hangs in the BIOS has a flat CMOS battery (coin cell). Replace it and restore the BIOS settings (boot order, SATA mode). If it still does not boot, the storage (HDD, SSD, CompactFlash) and the power supply are the next suspects.
6ES7715-1BB20-0BE1: drops out when warm or restarts by itself
Spontaneous restarts and drop-outs after running for a while are mostly thermal: a clogged dust filter, a fan that no longer turns or dried-out thermal paste. Clean filters and fans and check the cabinet temperature. Aged capacitors in the power supply give the same picture; a refurbishment addresses both.
What do I check when replacing a 6ES7715-1BB20-0BE1?
First make an image of the old device's storage; the software and licences are on it. Choose the same product version so chipset and drivers match the image, and carry over the CompactFlash or SSD with the image where possible. Then check the licences of WinCC, PCS 7 or the machine software, as they are sometimes tied to the hardware.
Fault not fixed: replace, exchange or repair the 6ES7715-1BB20-0BE1?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6ES7715-1BB20-0BE1 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6ES7715-1BB20-0BE1 still available?
Not new from the manufacturer any more: the 6ES7715-1BB20-0BE1 was discontinued since April 2020. Van Haelen supplies it refurbished and tested.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6ES7715-1BB20-0BE1?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.