Siemens 6FC5200-0AD32-2CC8 – Pvsl Bdfp SIMATIC IPC477E MPP WI
Siemens 6FC5200-0AD32-2CC8 – Pvsl Bdfp SIMATIC IPC477E MPP WI. Status: discontinued by the manufacturer, no longer available new since October 2026. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
Also written as: 6FC5 200-0AD32-2CC8, 6FC52000AD322CC8
The Siemens 6FC5200-0AD32-2CC8 is a frequency converter or servo drive. Manufacturer type designation: Pvsl Bdfp SIMATIC IPC477E MPP WI. Status: discontinued by the manufacturer, no longer available new since October 2026. Key data: weight 2.541 kg, HS code 84714100. When replacing, keep the parameter set of the old unit; it makes setting up the replacement quick. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6FC5200-0AD32-2CC8 |
|---|
| Type designation | Pvsl Bdfp SIMATIC IPC477E MPP WI |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since October 2026 |
|---|
| HS code | 84714100 |
|---|
| Weight | 2,541 kg |
|---|
Documentation from the manufacturer
Faults and fixes 6FC5200-0AD32-2CC8
Problems with 6FC5200-0AD32-2CC8: does not boot, BIOS settings or date lost
An industrial PC that starts with a wrong date after a power loss or hangs in the BIOS has a flat CMOS battery (coin cell). Replace it and restore the BIOS settings (boot order, SATA mode). If it still does not boot, the storage (HDD, SSD, CompactFlash) and the power supply are the next suspects.
6FC5200-0AD32-2CC8: drops out when warm or restarts by itself
Spontaneous restarts and drop-outs after running for a while are mostly thermal: a clogged dust filter, a fan that no longer turns or dried-out thermal paste. Clean filters and fans and check the cabinet temperature. Aged capacitors in the power supply give the same picture; a refurbishment addresses both.
What do I check when replacing a 6FC5200-0AD32-2CC8?
First make an image of the old device's storage; the software and licences are on it. Choose the same product version so chipset and drivers match the image, and carry over the CompactFlash or SSD with the image where possible. Then check the licences of WinCC, PCS 7 or the machine software, as they are sometimes tied to the hardware.
Fault not fixed: replace, exchange or repair the 6FC5200-0AD32-2CC8?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6FC5200-0AD32-2CC8 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6FC5200-0AD32-2CC8 still available?
Not new from the manufacturer any more: the 6FC5200-0AD32-2CC8 was discontinued since October 2026. Van Haelen supplies it refurbished and tested.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6FC5200-0AD32-2CC8?
Keep the parameter set of the old unit; it makes setting up the replacement quick. Also check power rating, supply voltage and any option boards.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.