Siemens 6GK1716-0HB71-3AC0 – S7-REDCONNECT 2008 Powerpack
Siemens 6GK1716-0HB71-3AC0 – S7-REDCONNECT 2008 Powerpack from the SIMATIC NET POWERPACK S7-REDCONNECT - 6GK1716-0HB71-3AC0 range. Status: discontinued by the manufacturer, no longer available new since December 2022. Van Haelen supplies it new in sealed factory packaging, with a 24-month warranty.
Also written as: 6GK1 716-0HB71-3AC0, 6GK17160HB713AC0
The Siemens 6GK1716-0HB71-3AC0 is a S7-300 control component from the SIMATIC NET POWERPACK S7-REDCONNECT - 6GK1716-0HB71-3AC0 range. Manufacturer type designation: S7-REDCONNECT 2008 Powerpack. Status: discontinued by the manufacturer, no longer available new since December 2022. Key data: weight 0.092 kg, HS code 85234910. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6GK1716-0HB71-3AC0 |
|---|
| Type designation | S7-REDCONNECT 2008 Powerpack |
|---|
| Series | SIMATIC NET POWERPACK S7-REDCONNECT - 6GK1716-0HB71-3AC0 |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since December 2022 |
|---|
| ETIM | EC001423 |
|---|
| HS code | 85234910 |
|---|
| Country of origin | DE |
|---|
| Weight | 0,092 kg |
|---|
Documentation from the manufacturer
All products of the SIMATIC NET POWERPACK S7-REDCONNECT - 6GK1716-0HB71-3AC0 series
Faults and fixes 6GK1716-0HB71-3AC0
Problems with 6GK1716-0HB71-3AC0: no connection, SF or BF on
Check the link LED first: without link it is the cable, the switch port or the configured speed. With link but no connection: IP address, subnet and device name of the CP, a duplicate IP or MAC conflict in the network, or a project that expects a different firmware version. After replacement the new CP gets its address and name again via STEP 7, TIA or the Primary Setup Tool.
6GK1716-0HB71-3AC0: connection drops sporadically
Sporadic drop-outs come from the network more often than from the CP: a duplex mismatch (fixed 100 full against auto), an overloaded ring, an unshielded cable next to frequency converters, or an ageing switch. Only when the fault persists with another cable and port is the CP suspect.
Fault not fixed: replace, exchange or repair the 6GK1716-0HB71-3AC0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6GK1716-0HB71-3AC0 new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6GK1716-0HB71-3AC0 still available?
Not new from the manufacturer any more: the 6GK1716-0HB71-3AC0 was discontinued since December 2022. Van Haelen supplies it from stock.
What should I check when replacing a 6GK1716-0HB71-3AC0?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.