Siemens 6RA8078-6DV62-0AA0-Z G00 G10
Siemens 6RA8078-6DV62-0AA0-Z G00 G10 – Frequentieregelaars. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: 6RA8 078-6DV62-0AA0-ZG00G10, 6RA8078-6DV62-0AA0-ZG00G10, 6RA80786DV620AA0ZG00G10
The Siemens 6RA8078-6DV62-0AA0-Z G00 G10 is a frequency converter or servo drive. When replacing, keep the parameter set of the old unit; it makes setting up the replacement quick. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6RA8078-6DV62-0AA0-Z G00 G10 |
|---|
| ETIM | EC001857 |
|---|
Documentation from the manufacturer
Faults and fixes 6RA8078-6DV62-0AA0-Z G00 G10
Problems with 6RA8078-6DV62-0AA0-Z G00 G10: F message on the SIMOREG, drive trips
A SIMOREG DC Master shows faults as an F number on the display. The most common causes are a missing phase or fuse on the mains side, a tachometer or encoder fault, overcurrent from a short circuit in the armature or field circuit and overtemperature of the thyristor bridge. Check the semiconductor fuses and the field current before suspecting the unit.
What do I check when replacing a 6RA8078-6DV62-0AA0-Z G00 G10?
Read out the parameter set with DriveMonitor and note the field supply and tachometer settings. Armature current and voltage of the replacement must be the same or higher; the software version of the CUD board must match the parameter set. Option boards (CBP, T400) move to the replacement.
Fault not fixed: replace, exchange or repair the 6RA8078-6DV62-0AA0-Z G00 G10?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6RA8078-6DV62-0AA0-Z G00 G10 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a 6RA8078-6DV62-0AA0-Z G00 G10?
Keep the parameter set of the old unit; it makes setting up the replacement quick. Also check power rating, supply voltage and any option boards.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.