Siemens 6SE3226-8DJ50
Siemens 6SE3226-8DJ50 – Frequency converters from the Vector range. Status: discontinued by the manufacturer, no longer available new; successor 6SE6440-2AD33-7EA1. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: 6SE3 226-8DJ50, 6SE32268DJ50
The Siemens 6SE3226-8DJ50 is a frequency converter or servo drive from the Midimaster (Vector) range. Status: discontinued by the manufacturer, no longer available new; successor according to the manufacturer: 6SE6440-2AD33-7EA1. Key data: weight 46 kg, dimensions 63,40 x 35,00 x 31,60 cm, HS code 85044088. When replacing, keep the parameter set of the old unit; it makes setting up the replacement quick. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6SE3226-8DJ50 |
|---|
| Series | Vector |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new |
|---|
| Successor | 6SE6440-2AD33-7EA1 |
|---|
| ETIM | EC001857 |
|---|
| HS code | 85044088 |
|---|
| Weight | 46 kg |
|---|
| Dimensions | 63,40 x 35,00 x 31,60 cm |
|---|
Documentation from the manufacturer
All products of the Vector series
All Frequency converters
Faults and fixes 6SE3226-8DJ50
Problems with 6SE3226-8DJ50: overcurrent, overvoltage or overtemperature
On frequency converters and servo amplifiers three fault groups are the most common. Overcurrent: short circuit or earth fault in motor or cable, too short a ramp or wrong motor data; if the fault returns with no motor, the output stage is defective. DC-link overvoltage: decelerating too fast without a braking resistor. Overtemperature: a clogged heat sink or a fan that no longer turns. Always note the fault code and the moment.
What do I check when replacing a 6SE3226-8DJ50?
Keep the parameter set of the old unit; it makes setting up the replacement quick. Check rating, supply voltage, frame and option boards, and whether the firmware version matches the parameter set. After long storage the DC-link capacitors should be reformed.
Fault not fixed: replace, exchange or repair the 6SE3226-8DJ50?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6SE3226-8DJ50 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6SE3226-8DJ50 still available?
Not new from the manufacturer any more: the 6SE3226-8DJ50 was discontinued. Van Haelen supplies it refurbished and tested.
What is the successor of the 6SE3226-8DJ50?
According to the manufacturer it is the 6SE6440-2AD33-7EA1. A successor does not always fit an existing installation without changes; replacing like for like is often the fastest route. If in doubt, ask us.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.