Siemens 6SE6400-0BP00-0AA0 – MICROMASTER 4 Basic Operator Panel (BOP) for MICROMASTER 420/440, version 0AA0
Siemens 6SE6400-0BP00-0AA0 – MICROMASTER 4 Basic Operator Panel BOP from the MICROMASTER range. Status: discontinued by the manufacturer, no longer available new since July 2014; successor 6SE6400-0BP00-0AA1. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
Also written as: 6SE6 400-0BP00-0AA0, 6SE64000BP000AA0
The Siemens 6SE6400-0BP00-0AA0 is the Basic Operator Panel (BOP) for the MICROMASTER 4 range, version 0AA0. It is the plug-in operator panel for the MICROMASTER 420 and 440 among others. With the BOP parameters are set and read out, the inverter is started and stopped by hand and frequency, current and fault messages are followed on the display; the panel clicks into the front of the inverter in place of the blanking cover and can also be used to copy a parameter set from one inverter to another. Dimensions 11 x 8 x 4 cm. Siemens discontinued this version on 1 July 2014; the stated successor is the 6SE6400-0BP00-0AA1 with the same function and fitting. When replacing an inverter without operator panel (version without AOP/BOP) this panel is needed to set the parameters; one BOP can be used for several inverters.
Available as
Product data
| Manufacturer | Siemens |
|---|
| Part number | 6SE6400-0BP00-0AA0 |
|---|
| Type designation | MICROMASTER 4 Basic Operator Panel BOP |
|---|
| Series | MICROMASTER |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new since July 2014 |
|---|
| Successor | 6SE6400-0BP00-0AA1 |
|---|
| ETIM | EC001857 |
|---|
| HS code | 85389099 |
|---|
| Country of origin | GB |
|---|
| Weight | 0,3 kg |
|---|
| Dimensions | 11,00 x 8,00 x 4,00 cm |
|---|
Documentation from the manufacturer
All products of the MICROMASTER series
All Frequency converters
Faults and fixes 6SE6400-0BP00-0AA0
Siemens FAQ: MICROMASTER 4 (MM420/MM440): Operational description of "Fn" button on Basic Operator Panels (BOP).?
Siemens answers this question in an FAQ for the 6SE6400-0BP00-0AA0 (25-10-2000); the link is below. If that does not solve it, or the unit is defective: we supply the 6SE6400-0BP00-0AA0 refurbished and tested, with a test report and a 24-month warranty; the lead time is shown on the article.
Source: Siemens Industry Online Support, 25-10-2000
Where do I find the manual of the 6SE6400-0BP00-0AA0?
From the manufacturer, free of charge: Operating Instructions: BOP - Basic Operator Panel (link below). They contain the wiring diagram, LED meanings and the technical data. With every refurbished unit we supply the test report per serial number.
Source: Siemens Industry Online Support, 01-10-2006
Problems with 6SE6400-0BP00-0AA0: F0001, F0002 or F0003
On the MICROMASTER 4 F0001 is overcurrent (short circuit or earth fault in motor or cable, too short a ramp, wrong motor data), F0002 DC-link overvoltage (too short a deceleration ramp, mains too high) and F0003 undervoltage (mains gone or sagging). If F0001 returns immediately on enable with no motor connected, the output stage is defective.
6SE6400-0BP00-0AA0: F0004, F0005 or F0011, temperature and overload
F0004 is drive overtemperature (heat sink), F0005 thermal overload I²t of the drive, F0011 motor overload according to the thermal model. Clean heat sink and fan and check the ambient temperature; for F0011 the motor load and the set motor current (P0305). A failing fan is the most common wear item on this series.
6SE6400-0BP00-0AA0: F0022, power stack hardware fault
F0022 reports a fault in the power stack (current measurement, IGBT or gate drive) and can rarely be cured with a parameter. Check the motor cable for a short circuit; if the message persists, the drive is defective. A refurbished unit with the parameter set carried over is then the fastest way to get the machine running again.
What do I check when replacing a 6SE6400-0BP00-0AA0?
Read out the parameter set with the BOP, AOP or STARTER before removing the old drive; without it you must enter the motor data and I/O configuration again. Check rating, voltage and frame size and whether a filter or braking resistor belongs to it. After long storage the DC-link capacitors should be reformed; ask us about it.
Fault not fixed: replace, exchange or repair the 6SE6400-0BP00-0AA0?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the 6SE6400-0BP00-0AA0 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the 6SE6400-0BP00-0AA0 still available?
Not new from the manufacturer any more: the 6SE6400-0BP00-0AA0 was discontinued since July 2014. Van Haelen supplies it refurbished and tested.
What is the successor of the 6SE6400-0BP00-0AA0?
According to the manufacturer it is the 6SE6400-0BP00-0AA1. A successor does not always fit an existing installation without changes; replacing like for like is often the fastest route. If in doubt, ask us.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.