Schneider Electric ABL8WPS24400
Schneider Electric ABL8WPS24400 – Voedingen from the Modicon range. Status: in phase-out at the manufacturer. Van Haelen supplies it refurbished, with a 24-month warranty.
The Schneider Electric ABL8WPS24400 is a Schneider/Modicon control component from the Modicon range. Status: in phase-out at the manufacturer. Key data: weight 2.7 kg, dimensions 14.3 x 16.6 x 16 cm, HS code 85044095. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Schneider Electric |
|---|
| Part number | ABL8WPS24400 |
|---|
| Series | Modicon |
|---|
| Manufacturer status | in phase-out at the manufacturer |
|---|
| ETIM | EC002540 |
|---|
| HS code | 85044095 |
|---|
| Country of origin | FR |
|---|
| Weight | 2,7 kg |
|---|
| Dimensions | 14.3 x 16.6 x 16 cm |
|---|
Documentation from the manufacturer
All products of the Modicon series
Faults and fixes ABL8WPS24400
Problems with ABL8WPS24400: no 24 V, LED off or flashing
LED off: check the mains voltage and the input fuse. LED flashing or the output coming back briefly again and again: the supply is in overload protection (hiccup), usually because of a short circuit or too heavy a load on the 24 V side. Disconnect the load: if the 24 V returns, the fault is in the installation, not in the supply.
ABL8WPS24400: output voltage sags or ripple increases
A supply that sags under load after years or shows more ripple usually has aged electrolytic capacitors. This shows as sporadic CPU resets, modules reporting SF or panels restarting. Replacement is then the reliable remedy; a refurbishment replaces these capacitors and tests the supply under load.
Fault not fixed: replace, exchange or repair the ABL8WPS24400?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the ABL8WPS24400 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the ABL8WPS24400 still available?
The manufacturer has put the ABL8WPS24400 in phase-out; new units are getting scarce. Van Haelen supplies it from stock.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a ABL8WPS24400?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.