Schneider Electric BMXCPS2000 – Power Supply Module
Schneider Electric BMXCPS2000 – Power Supply Module from the Modicon X80 range. Status: active in the manufacturer's range. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
The Schneider Electric BMXCPS2000 is a Schneider/Modicon control component from the Modicon X80 range. Manufacturer type designation: Power Supply Module. Status: active in the manufacturer's product range. Key data: weight 0.3 kg, dimensions 15,42 x 15,25 x 13,39 cm, HS code 85389091. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Schneider Electric |
|---|
| Part number | BMXCPS2000 |
|---|
| Type designation | Power Supply Module |
|---|
| Series | Modicon X80 |
|---|
| Manufacturer status | active in the manufacturer's range |
|---|
| ETIM | EC002540 |
|---|
| HS code | 85389091 |
|---|
| Country of origin | FR |
|---|
| Weight | 0,3 kg |
|---|
| Dimensions | 15,42 x 15,25 x 13,39 cm |
|---|
Documentation from the manufacturer
All products of the Modicon X80 series
Faults and fixes BMXCPS2000
Problems with BMXCPS2000: no 24 V, LED off or flashing
LED off: check the mains voltage and the input fuse. LED flashing or the output coming back briefly again and again: the supply is in overload protection (hiccup), usually because of a short circuit or too heavy a load on the 24 V side. Disconnect the load: if the 24 V returns, the fault is in the installation, not in the supply.
BMXCPS2000: output voltage sags or ripple increases
A supply that sags under load after years or shows more ripple usually has aged electrolytic capacitors. This shows as sporadic CPU resets, modules reporting SF or panels restarting. Replacement is then the reliable remedy; a refurbishment replaces these capacitors and tests the supply under load.
Fault not fixed: replace, exchange or repair the BMXCPS2000?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the BMXCPS2000 refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the BMXCPS2000 still available?
Yes. The BMXCPS2000 is still in the manufacturer's range.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a BMXCPS2000?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.