ABB CDP 312 – Keypad
ABB CDP 312 – Keypad from the ACS600 range. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: CDP312
The ABB CDP 312 is a ABB frequency converter or drive module from the ACS600 range. Manufacturer type designation: Keypad. Key data: weight 0.2 kg. When replacing, keep the parameter set of the old unit; it makes setting up the replacement quick. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | ABB |
|---|
| Part number | CDP 312 |
|---|
| Type designation | Keypad |
|---|
| Series | ACS600 |
|---|
| ETIM | EC001857 |
|---|
| Weight | 0,2 kg |
|---|
Documentation from the manufacturer
All products of the ACS600 series
All Frequency converters
Faults and fixes CDP 312
Problems with CDP 312: overcurrent, overvoltage or overtemperature
On frequency converters and servo amplifiers three fault groups are the most common. Overcurrent: short circuit or earth fault in motor or cable, too short a ramp or wrong motor data; if the fault returns with no motor, the output stage is defective. DC-link overvoltage: decelerating too fast without a braking resistor. Overtemperature: a clogged heat sink or a fan that no longer turns. Always note the fault code and the moment.
What do I check when replacing a CDP 312?
Keep the parameter set of the old unit; it makes setting up the replacement quick. Check rating, supply voltage, frame and option boards, and whether the firmware version matches the parameter set. After long storage the DC-link capacitors should be reformed.
Fault not fixed: replace, exchange or repair the CDP 312?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the CDP 312 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.