E82EV152_4C000 – Lenze 8200 Vector Frequenzumrichter 1.5KW ID:13142439
E82EV152_4C000 – Lenze 8200 Vector Frequenzumrichter 1.5KW ID:13142439. Van Haelen supplies it refurbished, with a 24-month warranty.
The E82EV152_4C000 is a drive or controller. Manufacturer type designation: Lenze 8200 Vector Frequenzumrichter 1.5KW ID:13142439. When replacing, keep the parameter set of the old unit; it makes setting up the replacement quick. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Part number | E82EV152_4C000 |
|---|
| Type designation | Lenze 8200 Vector Frequenzumrichter 1.5KW ID:13142439 |
|---|
| ETIM | EC001857 |
|---|
Faults and fixes E82EV152_4C000
Problems with E82EV152_4C000: OC1, OC5, OU, LU or OH
On Lenze 8200, 9300 and smd OC1 is a short circuit on the motor side, OC2 an earth fault, OC5 the I×t overload, OU DC-link overvoltage (decelerating too fast), LU undervoltage (mains gone or sagging) and OH heat sink overtemperature; OH3 is the motor PTC. If OC1 appears immediately on enable without a motor, the output stage is defective.
What do I check when replacing a E82EV152_4C000?
Read out the parameter set with Global Drive Control or the keypad and note the function module (standard I/O, INTERBUS, PROFIBUS, system bus); it defines how the drive sits in the installation. Rating, voltage and software version must match the set. On 9300 servo drives check the resolver or encoder setting and the motor data before enabling.
Fault not fixed: replace, exchange or repair the E82EV152_4C000?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the E82EV152_4C000 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a E82EV152_4C000?
Keep the parameter set of the old unit; it makes setting up the replacement quick. Also check power rating, supply voltage and any option boards.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.