Schneider Electric TSX-MFP-0128P
Schneider Electric TSX-MFP-0128P – PLC I/O-modules from the Modicon Premium range. Status: discontinued by the manufacturer, no longer available new. Van Haelen supplies it refurbished, with a 24-month warranty.
Also written as: TSXMFP0128P
The Schneider Electric TSX-MFP-0128P is a Schneider/Modicon control component from the Modicon Premium range. Status: discontinued by the manufacturer, no longer available new. Key data: weight 0.2 kg, dimensions 10.0 x 24.0 x 3.2 cm, HS code 85371091. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Schneider Electric |
|---|
| Part number | TSX-MFP-0128P |
|---|
| Series | Modicon Premium |
|---|
| Manufacturer status | discontinued by the manufacturer, no longer available new |
|---|
| ETIM | EC001419 |
|---|
| HS code | 85371091 |
|---|
| Country of origin | FR |
|---|
| Weight | 0,2 kg |
|---|
| Dimensions | 10.0 x 24.0 x 3.2 cm |
|---|
Documentation from the manufacturer
All products of the Modicon Premium series
Faults and fixes TSX-MFP-0128P
Problems with TSX-MFP-0128P: ERR LED on or program lost
On Modicon TSX Premium, M340 and Quantum a lit ERR LED indicates a processor or program fault; the diagnostics in Unity Pro or Control Expert name the cause. Older processors keep the program with a battery: a flat battery (BAT LED) erases it on a power loss. Always keep the project as a file or on the memory card as well.
What do I check when replacing a TSX-MFP-0128P?
Choose the same reference with the same or a higher firmware version so the project loads. Carry over the memory card, set the communication settings again (IP, Modbus address) and after loading check the I/O configuration against the rack.
Fault not fixed: replace, exchange or repair the TSX-MFP-0128P?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the TSX-MFP-0128P refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the TSX-MFP-0128P still available?
Not new from the manufacturer any more: the TSX-MFP-0128P was discontinued. Van Haelen supplies it refurbished and tested.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a TSX-MFP-0128P?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.