Schneider Electric TSXCAY41
Schneider Electric TSXCAY41 – PLC I/O modules from the Modicon Premium range. Status: in phase-out at the manufacturer. Van Haelen supplies it refurbished, with a 24-month warranty.
The Schneider Electric TSXCAY41 is a Schneider/Modicon control component from the Modicon Premium range. Status: in phase-out at the manufacturer. Key data: weight 0.61 kg, dimensions 18,00 x 26,00 x 9,50 cm, HS code 85389091. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Schneider Electric |
|---|
| Part number | TSXCAY41 |
|---|
| Series | Modicon Premium |
|---|
| Manufacturer status | in phase-out at the manufacturer |
|---|
| ETIM | EC001419 |
|---|
| HS code | 85389091 |
|---|
| Weight | 0,61 kg |
|---|
| Dimensions | 18,00 x 26,00 x 9,50 cm |
|---|
Documentation from the manufacturer
All products of the Modicon Premium series
Faults and fixes TSXCAY41
Problems with TSXCAY41: ERR LED on or program lost
On Modicon TSX Premium, M340 and Quantum a lit ERR LED indicates a processor or program fault; the diagnostics in Unity Pro or Control Expert name the cause. Older processors keep the program with a battery: a flat battery (BAT LED) erases it on a power loss. Always keep the project as a file or on the memory card as well.
What do I check when replacing a TSXCAY41?
Choose the same reference with the same or a higher firmware version so the project loads. Carry over the memory card, set the communication settings again (IP, Modbus address) and after loading check the I/O configuration against the rack.
Fault not fixed: replace, exchange or repair the TSXCAY41?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the TSXCAY41 refurbished: tested to this family's test protocol, with a test report per serial number, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the TSXCAY41 still available?
The manufacturer has put the TSXCAY41 in phase-out; new units are getting scarce. Van Haelen supplies it from stock.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a TSXCAY41?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.