Schneider Electric TSXDEY64D2K – Input Module TELEMECANIQUE
Schneider Electric TSXDEY64D2K – Input Module TELEMECANIQUE from the Modicon Premium range. Status: in phase-out at the manufacturer; successor BMXDDI6402K. Van Haelen supplies it refurbished or new in sealed factory packaging, with a 24-month warranty.
The Schneider Electric TSXDEY64D2K is a Schneider/Modicon control component from the Modicon Premium range. Manufacturer type designation: Input Module TELEMECANIQUE. Status: in phase-out at the manufacturer; successor according to the manufacturer: BMXDDI6402K. Key data: weight 0.37 kg, dimensions 5,10 x 15,20 x 12,70 cm, HS code 85389091. When replacing, check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable. Ask us about exchange, repair and a spare-parts pool for your installation.
Available as
Product data
| Manufacturer | Schneider Electric |
|---|
| Part number | TSXDEY64D2K |
|---|
| Type designation | Input Module TELEMECANIQUE |
|---|
| Series | Modicon Premium |
|---|
| Manufacturer status | in phase-out at the manufacturer |
|---|
| Successor | BMXDDI6402K |
|---|
| ETIM | EC001419 |
|---|
| HS code | 85389091 |
|---|
| Country of origin | FR |
|---|
| Weight | 0,37 kg |
|---|
| Dimensions | 5,10 x 15,20 x 12,70 cm |
|---|
Documentation from the manufacturer
All products of the Modicon Premium series
Faults and fixes TSXDEY64D2K
Problems with TSXDEY64D2K: ERR LED on or program lost
On Modicon TSX Premium, M340 and Quantum a lit ERR LED indicates a processor or program fault; the diagnostics in Unity Pro or Control Expert name the cause. Older processors keep the program with a battery: a flat battery (BAT LED) erases it on a power loss. Always keep the project as a file or on the memory card as well.
What do I check when replacing a TSXDEY64D2K?
Choose the same reference with the same or a higher firmware version so the project loads. Carry over the memory card, set the communication settings again (IP, Modbus address) and after loading check the I/O configuration against the rack.
Fault not fixed: replace, exchange or repair the TSXDEY64D2K?
Replacing from stock is the fastest route when a machine is down. Van Haelen supplies the TSXDEY64D2K refurbished (tested, with a test report per serial number) or new in factory packaging, with a 24-month warranty. The current lead time is shown with the condition on this page. Prefer an exchange: you get a refurbished unit straight away and return the faulty one within 14 days. Repairing your own unit is also possible: diagnosis, then a fixed price.
What information should I send for a quick diagnosis?
A photo of the rating plate (order number, product version, firmware), the exact fault code or LED state, when the fault occurs (at power-up, on enable, under load) and what you have already tried. For PLCs an export of the diagnostic buffer, for drives the parameter set. With that we can usually say the same day whether replacing, exchanging or repairing is best.
Frequently asked questions
Is the TSXDEY64D2K still available?
The manufacturer has put the TSXDEY64D2K in phase-out; new units are getting scarce. Van Haelen supplies it from stock.
What is the successor of the TSXDEY64D2K?
According to the manufacturer it is the BMXDDI6402K. A successor does not always fit an existing installation without changes; replacing like for like is often the fastest route. If in doubt, ask us.
What does refurbished mean?
Cleaned, inspected, aged or critical components replaced and tested to our test protocol for this product family. You get a 24-month warranty, a test report and a serial number label.
What should I check when replacing a TSXDEY64D2K?
Check the product version (issue) on the rating plate; for most installations the same or a higher issue is suitable.
Can I exchange or repair my faulty unit?
Yes. With an exchange Van Haelen supplies a refurbished unit straight away and you return the faulty one. With a repair you first get a diagnosis and then a fixed price, with test report and warranty.